Nissan Murano Comes with DC380 vyclone 1/3 hp compressor. Check valve steel leader hose solenoid steel fittings 3/8 In. Airhose 70 on 120 off pressure switch. 3 gallon steel.

On many of our struts you might find an extra set of mounting holes on the bottom clevis. For the lowest position select the top holes. After securing in place install the supplied schrader Manual fill valve and air up to approximately 85lbs with the wheel on and on the ground. making sure that your strut does not contact any body parts during the travel. It is possible on rare cases that the inner fender may have to be trimmed to allow full travel without contact.

Note - If you are on a tight budget you can leave the schrader valves installed and use a</ pump to adjust your height. There are many air management options but the only one you should consider is the plug & play because all of the wiring and plumbing of the valves and switches is already done for you.

• Make - Nissan
• Model - Murano
• Year - 2003-2006
• Item Weight - 158 lbs.