Toyota MR2 Rear Air Suspension ride kit. Airkits kit is for one axle only &; does not include any other components. Your vehicle may use air struts air cylinders or airbags depending on make year mode.

On many of our struts you might find an extra set of mounting holes on the bottom clevis. For the lowest position select the top holes. After securing in place install the supplied Schrader Manual fill valve and air up to approximately 85lbs with the wheel on and on the ground. Making sure that your strut does not contact any body parts during the travel. It is possible on rare cases that the inner fender may have to be trimmed to allow full travel without contact.

Note - There are many air management options but the only one you should consider is the plug &; play because all of the wiring and plumbing of the valves and switches is already done for you. With Plug and Play all you have to do is run the supplied airlines from your strut or bags and just Plug them into the pre-installed fittings on the back side of the Plug &; Play.

• Make - Toyota
• Model - Mr2
• Year - 1990-1995
• Item Weight - 55 lbs.