Hangers Fit 2Wd/;4Wd. Weldon or Bolton. Hardware not included raw. Front &; rear Leaf spring Hanger. Lift your truck without changing the ride besides Leaf spring.

• Place your jack under the pumpkin and rais errear end to relieve pressure on the shocks. Remove shocks from lower mounts and lower jack to relieve pressure on the springs.
• Remove front spring bolts and lower axle.
• The stock hanger using 2 washers one outer and one inner per bolt. Torque all bolts to 100-115 lbs. And re tighten after driving.
• If necessary use a drill so bolts will fit without damage to threads.
• Install the new hanger in existing holes. Torque all bolts to 100-115 lbs.
• Raise jack up until the front of the leaf spring is in the new hanger.
• Re-install front spring bolts and shock absorbers.
• Note - You will need to re-torque all bolts after driving 100 miles.

• Make - Ford
• Model - Bronco
• Year - 1978
• Item Weight - 85 lbs.