2 In. Hanger Front Of Rear Leaf spring. Weldon or Bolton. Hardware not included raw. Front &; rear Leaf spring Hanger. Lift your truck without changing the ride besides Leaf spring.

• Place your jack under the pumpkin and rais errear end to relieve pressure on the shocks. Remove shocks from lower mounts and lower jack to relieve pressure on the springs.
• Remove front spring bolts and lower axle.
• The stock hanger using 2 washers one outer and one inner per bolt. Torque all bolts to 100-115 lbs. And re tighten after driving.
• If necessary use a drill so bolts will fit without damage to threads.
• Install the new hanger in existing holes. Torque all bolts to 100-115 lbs.
• Raise jack up until the front of the leaf spring is in the new hanger.
• Re-install front spring bolts and shock absorbers.
• Note - You will need to re-torque all bolts after driving 100 miles.

• Raise the rear end with a jack to relieve tension on shocks. Remove shocks from lower mounts and lower jack to relieve pressure on springs.
• Remove front and rear spring bolts and u-bolts to free spring.
• Install new lowered leaf springs. Use factory hardware and bolt together ( in reverse order ). Make sure spring bolt lines up with axle.
• You will need to re-torque all bolts after 100 miles.

• Make - Chevrolet
• Model - S10
• Year - 1982
• Item Weight - 85 lbs.