9 - 10 In. Hanger Front &; Rear Of Rear Leaf + Shackle. Weldon or Bolton. Hardware not included. Place your jack under the pumpkin and rais errear end to relieve pressure on the shocks. Remove shocks from lower mounts and lower jack to relieve pressure on the springs

• Remove front spring bolts and lower axle.
• The stock hanger using 2 washers one outer and one inner per bolt. Torque all bolts to 100-115 lbs. and re tighten after driving.
• If necessary use a drill so bolts will fit without damage to threads.
• Install the new hanger in existing holes. Torque all bolts to 100-115 lbs.
• Raise jack up until the front of the leaf spring is in the new hanger.
• Reinstall front spring bolts and shock absorbers.
• Note:You will need to re-torque all bolts after 100 miles.

• Model - Chevrolet C10
• Item weight- 100 lbs.
• Year - 1973
• 1973-1987 Chevrolet K10 K20.